Safety Protections And Devices - Berkel BF+15F Mode D'emploi Et D'entretien

1.7.1 - Warning and danger plates (fig. 1.7.2)
When the machine is connected to the electrical supply do not intervene on electri-
cal components.
You risk being electrocuted.
Respect the warnings on the plates. Not observing them could cause perso-
nal injuries.
Make sure the plates are always present and leggible.
If they are not, put them on or replace them.
D

1.8 - Safety protections and devices

Before proceeding to using the machine make sure the safety devices are whole
and in the correct place. At the beginning of every work shift check that they are
present and working correctly. If that is not the case warn the person in charge of
maintenance.
1. Protection carters for the electrical and hydraulic components.
2. Safety valve.
Inside the machine there is a maximum pressure valve that limits the piston
pushing power, fig. 1.8.1.
ATTENTION!
A
230 V
ATTENTION!
400 V
9
B
C
Fig. 1.7.2
Fig. 1.8.1