Turning The Appliance On And Off; Checking Connection To Electricty Supply; Checking Protections And Safety Features And Their Efficiency - Berkel BH+25T Mode D'emploi Et D'entretien

Turning the appliance On and Off

5
5.1 Checking connection to electricity supply
1 2 3

5.2 Checking protections and safety features and their efficiency

BH+25T
1
1 - Rotor Protection grille (Fig. 5.2.1)
Visually check that the protection grille is intact.
2 - Micro-switch (Fig. 5.2.1)
With the appliance running, check that it automatically stops when the protection grille
is raised. If this is not the case contact you local authorised dealer or the manufac-
turer.
ATTENTION! If the previously mentioned safety protections and casing are not intact,
are damaged, missing or work incorrectly, turn the appliance off and contact the after-
sales assistance to repair the appliance.
Fig. 5.1.1
2
Switch the on/off switch on the appliance to po-
sition "I". Press push button "1" for starting, and
then immediately press push button "2" for stop-
ping. This is to check that the appliance works
correctly. Press push button "3" for starting,
and then immediately press push button "2" for
stopping. This is to check that the rotor rotates
in an opposite direction to push button "1".
3
17
BH+50F - BH+80F - BH+180F
1
2
Fig. 5.2.1