Turning On The Appliance; Turning Off The Appliance; Inversion; Using The Machine - Berkel BH+25T Mode D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5.3

Turning On the appliance

Switch the power on/off switch from position "0" to "1". Press push button "3" for start-
ing the rotor.
5.4

Turning Off the appliance

To stop the appliance press push button "2" (stops the electric motor.
Switch the power on/off switch to position "0" turning off the power supply.
5.5

Inversion

To invert rotor rotation press push button "3".
Note:
When a work shift is over always switch the on/off power switch to position "0".

Using the machine

6
6.1

Rules

ATTENTION!
Only authorised staff can use the appliance.
Before use the worker must make sure that all the protections are in place and work
correctly. If this is not the case, turn the appliance off and contact the mainenance
team. Make sure there is sufficient lighting for clear and good visibility.
Carry out several practice runs, without any food product, assisted by specialised staff
to become familiar with the appliance so as to work in safe conditions.
6.2
How to use the mixer
With the on/off switch in position "0" fill the mixer .
The food product to be mixed must be contained within the mixing drum and must not
exceed the consented weight. Close the grille and start the mixer (refer to chap. 5).
BH+25T
Fig. 6.2.1
BH+50F - BH+80F - BH+180F
18

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bh+50fBh+80fBh+180f

Table des Matières