Danger And Warning Notices; Work Position; Environment; Lighting - Berkel BH+25T Mode D'emploi Et D'entretien

ATTENTION!
Do Not for any reason tamper with the safety features.

1.9 Danger and Warning Notices

ATTENTION When the appliance is connected to the electricity supply do not touch
any of the electrics. There is the risk of being electrocuted. Always respect the infor-
mation given on the warning notices. Non- observance can cause injuries or
even death. Make sure the warning notices are always in their correct position and
are legible. If for some reason they are missing or are illegible fix them to the appli-
ance or replace them.
400 VOLT
230 VOLT

1.10 Work Position

The correct work position for using the
appliance is shown in Fig. 1.10.1
1.11

Environment

The appliance is designed for working in the following environment:
- minimum environment temperature: 5 °C;
- maximum environment temperature: +40 °C;
- humidity: 50% at 40 °C.
1.12

Lighting

Where the mixer is located there should be enough natural light
and artificial light conforming with the local regulations.
In any case, the lighting must always conform with the regula-
tions of the country of destination and should not create dan-
gerous reflections.
clearly read the control panel and clearly identify the start and
stop buttons.
A
ATTENZIONE!
RICORDARSI DI STACCARE
LA CORRENTE ELETTRICA
PRIMA DI QUALSIASI TIPO DI MANU-
TENZIONE
The lighting must permit the worker to
C
10
B
Fig. 1.9.2
BH+25T
Fig. 1.10.1
BH+50F - BH+80F -
BH+180F