Foreseen Use; Unforeseen Uses; Safety Prescriptions; Environmental Conditions - Berkel BF+15F Mode D'emploi Et D'entretien

1.5 - Foreseen use

The machine has been designed and built to fill sacks with meat mistures or similar
products.
It must be used in professional environments and personnel who use it must ope-
rate in the sector and must have read and understood this manual.
The machine must be used when it is placed on a flat and clean surface.

1.6 - Unforeseen uses

The machine must be used only for the purposes foreseen by the manufacturer. In
particular:
-
do not use the macine if it has not been correctly installed with all of the protec-
tions in one piece and correctly assembled to avoid the risk of serious personal
injuries.
-
do not access electrical components without having previously disconnected
the machine from the electrical supply mains: there is the risk of electrocution.

1.6.1 - Safety prescriptions

-
Do not carry out any intervention without previous authorization.
-
Respect the procedures given fror maintenance and technical assistance.
-
Do not wear clothes that do not comply with safety laws.
Consult the employer about safety prescriptions in force and safety devices to
be used.
-
Do not start up a broken down machine.
Before using the machine make sure that any situation that could compromise
safety has been eliminated. If there is any irregularity stop the machine and
notify persons in charge of maintenance.
-
Do not allow unauthorized personnel to intervene on the machine.
If an accident is caused by the electrical current the machine operator must be
immediately taken off the machine (because one usually loses consciousness).
This operation is dangerous.
The injured person in this case is the operator: touching him means being elec-
trocuted.
It is therefore opportune to disconnect the contacts directly from the line fee-
ding valve; if that is not possible move the victim away by using insulated mate-
rials (wodden or pvc sticks, fabric, leather, etc...).
Medical personnel must promptly intervene and the patient must be recovered
in a hospital.

1.6.2 - Environmental conditions

The machine is foreseen to run in the following environmental conditions:
- altitudes that do not exceed 1000 m
- minimum environmental temperature: -5 °C
- maximum environmental temperature: +40 °C
- relative humidity: 50%
7