Maintenance - Renkforce 1086303 Notice D'emploi

12. Maintenance

Regularly check the technical safety of the effect beamer, e.g. for damage to the mains cable or the ca-
sing.
If you have reason to believe that the device can no longer be operated safely, disconnect it immediately
and make sure it is not operated unintentionally. Pull the mains plug from the mains socket!
It can be assumed that safe operation is no longer possible if:
• the device is visibly damaged
• the device no longer works
• the device has been stored under unfavourable conditions for an extended period of time or
• after exposure to extraordinary stress caused by transport
Always observe the following safety instructions before cleaning or servicing the effect beamer:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is
carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected
from all power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations must per-
form repairs.
Cleaning
The outside of the effect light should only be cleaned with a soft, dry or slightly moistened cloth.
Never use any aggressive cleaning agents or chemical solutions as these may damage the surface of the
casing.
38