Handling; Disposal; Technical Data - Renkforce 1086303 Notice D'emploi

13. Handling

• Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the
intended grip areas.
• Always pull it from the socket using the intended grips.
• Disconnect the mains plug from the mains socket during thunderstorms for reasons of safety.
• Never put any filter foils, masks or other materials over the light exit. This may cause heat damage and
danger of fire.
• The device may heat up during operation. Never touch the casing during operation. Let the effect light
cool off after operation before touching or cleaning the casing.
• Do not cover the device to ensure sufficient ventilation. Air circulation also must not be impaired by any
objects like magazines, tablecloths, curtains, etc. During operation, keep a minimum distance of 0.5 m
around the device.

14. Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste!
Dispose of the product according to the applicable statutory provisions at the end of its service
life.

15. Technical Data

Operating voltage............................................... 100-240 V/50/60 Hz
Power consumption........................................... 78 W
Protection type ................................................... IP65
Capacity of mains output .................................. 1210 W
Operating modes . ............................................... DMX / auto / master-slave
LEDs...................................................................... 16 (3 W RGB)
DMX protocol...................................................... DMX 512
DMX channels .................................................... 3 / 7 / 10 / 16 / 24 / 28 (depending on DMX operating mode)
Dimensions.......................................................... 1050 x 85 x 81 mm (without assembly material)
Weight . ................................................................. 5.5 kg
39