Automatic Operation; Operation With Fixed Colour Settings - Renkforce 1086303 Notice D'emploi

c) Automatic Operation
• If required, push the button MENU until the display is in the main menu.
• Push the button r or s until AUto is displayed.
• Push the ENTER button for confirmation of your selection.
• Push the ENTER button again to get to the selection of the desired programme.
• The automatic programme (AUtx) is displayed (x defines the programme type).
• Set the programme start with the buttons r and s.
• Push the ENTER button for confirmation of your selection.
• The running speed (SP_x) is displayed (x defines the speed).
• Set the speed with the buttons r and s.
• Push the ENTER button for confirmation of your selection.
• Push the button MENU until the display is in the main menu again.
d) Operation with Fixed Colour Settings
• If required, push the button MENU until the display is in the main menu.
• Push the button r or s until CoLo is displayed.
• Push the ENTER button for confirmation of your selection.
• Push the ENTER button again to get to the selection of the desired colour.
• The colour (CoLx) is displayed (x defines the colour).
• Set the desired colour with the buttons r and s.
• Push the ENTER button for confirmation of your selection.
• Push the button MENU until the display is in the main menu again.
If you want to choose a personal colour setting, select the setting AtF instead of CoLx during
colour selection.
Pushing the button ENTER again permits setting of the colour brightness of the individual basic
colours red, Gree (green) and bLUe with the buttons r and s.
Depending on the individual colour intensities set, different mixed colours can be created.
36