Connecting Your Appliance To The Kenwood World App; Wi-Fi Menu - Kenwood kCook Multi Smart CCL45 Instructions

before plugging in
Make sure your electricity supply is the same as the
one shown on the underside of the appliance.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
This appliance conforms to EC Regulation
1935/2004 on materials and articles intended to
come into contact with food.
This appliance contains and uses wireless module
FCC ID VVJ-TA3200R1D-SA.
This appliance is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU.
before using for the first time
Remove the plastic blade covers from the blade.
These covers should be discarded as they are to
protect the blade during manufacture and transit only.
Wash the parts: see 'care and cleaning'.

Wi-Fi Menu

1 When the unit is in stand-by mode, press the increase (+) button for 3 seconds.
2 Press the (+) and (-) buttons to scroll through the menu and press the OK button to confirm the required
option.
3 To exit the Wi-Fi menu press the Cancel button. The unit will also return to standby mode if inactive for 10
seconds.
FACTORY RESET WI-FI
MAC:
Selecting this option will erase all Wi-Fi data stored on the unit and restore it to
factory settings.
When selected, the unit will return to the standby mode.
important
When disposing of the unit, it is important to factory reset the unit to protect
your personal data.
This option will automatically display the appliance's Wi-Fi MAC address.
connecting your appliance
to the Kenwood World app
The Kenwood World app will allow you to control
your appliance through your smart phone or tablet.
1 Download the Kenwood World app on to a smart
phone or tablet device.
2 Once the download is complete, open the app and
follow the instructions on the screen.
PIN number
This will be required when prompted by the
Kenwood World app.
The appliance can only be connected when the PIN
Number is shown on the display screen. If the PIN is
entered incorrectly, follow the instructions on the app
and retry.
To display the unit's PIN number, press and hold the
OK button for 3 seconds (only when connected to
Wi-Fi).
Note:
Wi-Fi
Operates with IEEE802.11 b,g and n at 2.4 GHz
only, and connects to networks using WPA2-PSK
Compatibility
Kenwood World app compatible with latest
versions of iOS and Android.
7