Manual Mode - Kenwood kCook Multi Smart CCL45 Instructions

Manual Mode

Manually select the required temperature, time, stirring or chopping function.
Select the setting you wish to alter and use the (+) and (-) buttons to adjust the setting.
Note:
Hold down the (+) and (-) buttons to scroll through the settings more rapidly.
When a setting is selected, the relevant display screen symbol will flash.
The setting will lock after 4 seconds if no action is taken.
Temperature can be set from 30°C - 180°C at 1°C increments.
Alternatively, the unit can be used without setting a temperature by selecting
"OFF".
Time can be set from 5 seconds to 8 hours.
Note:
• If no time is set, the cooking food processor will count up to a maximum of 8
hours.
Twelve speed settings are available which enable you to select the appropriate
setting for individual recipes. Some recipes will require constant stirring to stop
ingredients from sticking to the bottom of the bowl, whereas others will benefit
from intermittent stirring to maintain the consistency of the food. Higher speed
settings are available to process soups, etc.
Speed 1 – Intermittent stir with long pauses. When set to this position,
intermittently operates on a slow speed every 60 seconds
for approximately 2 revolutions, making it suitable for stirring
casseroles, etc.
Speed 2 – Intermittent stir with medium pauses. When set to this
position, intermittently operates on a slow speed every
15 seconds for approximately 2 revolutions.
Speed 3 – Intermittent stir with short pauses. When set to this position,
intermittently operates on a slow speed every 5 seconds for
approximately 2 revolutions.
Speed 4 to 12 – Continuous speeds gradually increasing to maximum speed.
13