Taking Off The Helmet 90 J; Before Every Journey; Checking The Helmet; Checking The Chinstrap - SCHUBERTH C3 PRO Mode D'emploi

Masquer les pouces Voir aussi pour C3 PRO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
D. PUTTING THE HELMET ON AND TAKING
IT OFF
2. TakING oFF THE HElMET
1. Open and lock the chin bar. Make sure the sun visor is retracted
into the helmet shell.
2. Open the chinstrap by pulling the red strap on the ratchet
fastener and thus releasing the locking buckle. Having done
this, pull the ratchet tongue out of the locking buckle.
3. Undo the Velcro of the chinstrap comfort pad.
4. Grasp the ends of the chinstrap and pull the chinstrap ends
apart.
5. The helmet can now be removed easily from the head.
6. Close the chin bar.
Tip:
To avoid scratching any objects you might place the helmet
on, we recommend closing the chin-strap after you have
taken the helmet off.
90
E. BEFORE EVERY JOURNEY
For your safety, check the following points before every journey:

1. CHECKING THE HELMET

Check the helmet regularly for damage. Small superficial
scratches will not impair the protective function of your helmet.
In the case of more serious damage (cracks, dents, flaking and
cracking paint, etc.), the helmet should no longer be used.
Note:
If you have lost a significant amount of weight, you should
check that your helmet is still the right size for you.
2. CHECKING THE CHINSTRAP (with helmet on and fastened)
1. Check that the chinstrap passes under your chin.
2. Slip your index finger under the chinstrap and pull.
- If the chinstrap is loose under the chin, it is too long and
needs to be tightened.
- If the chinstrap loosens when you pull it, it is not properly
fastened. Undo the chinstrap completely and try fastening it
again. Repeat the test.
3. If you are unable to fasten the chinstrap so that it fits snugly
against the chin, check that your helmet is still the right size
for you.
Note:
Repeat the test after each adjustment.
Caution :
Never ride with the chinstrap unfastened or incorrectly
adjusted. The chinstrap should fit correctly and should not
become loose when pulled. The fastener is not correctly
closed if the chinstrap becomes loose when pulled.
91

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières