Loading And Stability; Align The Load Towards The Centre; Stacker Truck Tipping Over; Figure 5 Load Alignment - HanseLifter IMOW-E-BF Serie Mode D'emploi

31.
Also to be observed
Drive the stacker truck on firm surfaces only
(concrete, etc.)
Optimal weather conditions:

Air temperature: 5ºC~40ºC

Wind velocity: Below 5m/s

Air humidity: Below 90%
It is prohibited to use the stacker truck in potentially
explosive environments.
Operate the stacker truck for purposes related to
your work only.

Loading and stability

It is very important that the stacker truck driver is
familiar with the structure of the stacker truck and
the correlation between the load and its stability.

Align the load towards the centre

There are differences between the individual goods
to be transported to such as: shape, centre of
gravity, packaging etc.. It is important that attention
is paid to these differences during loading, so that
the goods are always loaded with the centre of
gravity towards the middle. The visual centre of
gravity is not always the actual centre of gravity.
Pay attention to instructions on the packaging
relating to the centre of gravity.

Figure 5 Load alignment

Stacker truck tipping over

If the stacker truck tips over, get out of the danger
zone as quickly as possible!
Page 20 of 48
Any kind of reproduction, even in parts, is not permitted. IMOW-E-BF series