Emergency Stop Switch; Steering The Pallet Stacker; Battery Display; Figure 9 Emergency Stop And Steering - HanseLifter IMOW-E-BF Serie Mode D'emploi

Emergency stop switch

The stacker truck has an emergency stop device
(No. 1 in Figure 9 Emergency stop and steering)
which immediately disconnects the battery from the
stacker truck. This can be activated by pressing it to
switch off the entire power supply in the following
cases:

Accident

Parking the stacker truck

Emergency situation, risk of accident

Welding work

Figure 9 Emergency stop and steering

Restore the power supply by pulling out the
emergency stop switch (no. 1 in Figure 9
Emergency stop and steering).

Steering the pallet stacker

The pallet stacker is operated and steered via the
drawbar head.
To do this, turn the drawbar head and drawbar arm
as shown in Figure 9 Emergency stop and steering.
Note
The more you pull the drawbar arm towards
you, the longer the steering lever will be. This
reduces the steering forces.
Page 22 of 48
Any kind of reproduction, even in parts, is not permitted.
Key switch
Main power switch for the control current.

Figure 10 Key switch

OFF Power supply interrupted, battery indicator
goes off.
ON Power on, the battery indicator lights up.
Control current to all electrical components.

Battery display

Displays the battery status in 3 steps
Green = 70 - 100%
Orange = 30 - 60%
Flashing red = 0 - 20%
Only use the original charger supplied. Charge the
battery without interruption in one go.
Note
Avoid partial charging.
Partial charging considerably
performance of the battery.
reduces the
IMOW-E-BF series