Operation; Figure 6 Pump Lever; Figure 7 Control Elements; Figure 8 Driving Switch - HanseLifter IMOW-E-BF Serie Mode D'emploi

Operation

All operating buttons are designed to be accessible
from the normal operating position. The buttons
automatically return to the neutral or home position
by spring return.
If the buttons no longer act in this way, they must
be repaired.

Figure 6 Pump lever

No. Allocation
1 Drive-off switch
2 Driving switch
3 Horn switch
4 Lifting
5 Lowering

Table 1 Drawbar buttons

Figure 7 Control elements

IMOW-E-BF series Any kind of reproduction, even in parts, is not permitted.
Function
When switched on, the
vehicle moves forward
Controls the direction
and speed of travel
Sounds a warning
signal
Lifts the fork
Lowers the fork
No Allocation
.
1 Operating hours
counter
2 Battery display
3 Error display

Table 2 Control elements

Figure 8 Driving switch

The driving switch allows variable speed regulation.
The positions are:

Variable forward from 0-100%

Middle position stop

Variable reverse from 0-100%
Function
full hours are displayed
before the decimal
point, 1/10s of operating
hours are after the
decimal point
Displays the battery
status in 3 steps
Green = 70 - 100%
Orange = 30 - 60%
Flashing red = 0 - 20%
when the display lights
up red the stacker truck
is ready for operation. If
the display is flashing,
there is an error
Page 21 of 48