Loading Instructions; Load Distribution; Load Centre Of Gravity - HanseLifter SPA Serie Mode D'emploi

Loading instructions

Load distribution

•
1/1 The full load carrying capacity can only be achieved when the load is distributed across the entire
surface.
•
1/2 If the load only covers half of the surface in a longitudinal direction, only half the load capacity is
achieved.
•
1/3 If the load only covers half of the tabletop in a lateral direction, only a third of the load capacity
exists.

Load centre of gravity

Always observe the load centre of gravity during loading. Lateral loading is to be avoided, if possible. If it cannot
be avoided, please take into account the reduced load capacity.
Figure 1 Load distribution
Figure 2 Load centre of gravity
SPA / SPB / SPAG series
Any kind of reproduction, even in parts, is not permitted.
Page 9 of 16