Cleaning And Care - SilverCrest SKM 550 B2 Mode D'emploi

2) Remove the protective cover for the blender
drive hub (turn so that the marking "
the protective cover for the blender drive hub is
in line with the marking " " on the appliance
itself) (Image F).
3) Position the blender 4 on top of the appliance
(so that the marking "
lines up with the marking " " on the appli-
ance).
Turn the blender anti-clockwise until the stop
(so that the marking "
lines up with the marking " " on the appli-
ance itself) (Image G).
4) Add the ingredients.
–
Maximum fill quantity: approx. 1 litre;
–
Foaming liquids, maximum 0.5 litre;
–
Ideal processing quantity for solids: 50 - 100 g.
NOTE
► Take note of the table in the section
"Recommended filling quantities".
5) Place the lid onto the measuring jug slightly
offset and then turn it until the lid clicks into
place (Image I).
6) Turn the rotary switch r to the required setting.
Adding more ingredients
1) Switch the appliance off using the rotary switch r.
2) Rotate the lid of the blender 4 a little (Image I),
remove the lid and add the ingredients you
want to mix
or
3) Rotate the measuring jug, which is placed in
the lid of the blender 4, by 90° and remove it.
Then gradually add the solid ingredients
using the opening provided for this purpose.
■ 28 │ GB │ IE
" on
" on the blender 4
" on the blender 4
After you have finished
using your appliance
1) Switch the appliance off using the rotary
switch r.
2) Turn the blender 4 clockwise and remove it.
NOTE
Ideally, you should clean the blender 4 im-
►
mediately after use (see the section "Cleaning
and care"). This makes food residues easier
to remove.

Cleaning and care

DANGER – ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the plug from the mains power socket!
Risk of electric shock!
NEVER immerse the appliance in water or
any other liquid!
ATTENTION! DAMAGE TO PROPERTY!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces
of your appliance.
TIPS
► It is best to clean the appliance directly after
use. This makes food residues easier to remove.
► Processing foodstuffs containing strong pig-
ments, such as carrots, may cause staining of
the plastic parts. Such stains can be removed
using a little cooking oil.
SKM 550 B2