Technician Mode Programming Cycle; Preinfusion - Nuova Simonelli Microbar Mode D'emploi

EN
7.5 TECHNICIAN MODE
PROGRAMMING CYCLE
To access the functions that can only be program-
med using the TECHNICIAN MODE, scroll through
all of the functions that can be accessed from the
USER MODE until the display reads as follows:
Enter the correct password to view the first item in
the programming menu that can be accessed from
the TECHNICIAN MODE.
NOTE: The standard password setting is:
Therefore, to access the functions reserved
to technicians when entering this mode for
the first time, or if the password has not yet
been changed, it is necessary to press the
key on the machine keyboard five
times in succession.
If an incorrect password is entered, the machine will
automatically quit the programming mode to enter the
machine ready mode.

10. PREINFUSION

Press the ENTER key to access the submenu.
This programmes the possibility of coffee tab
preinfusion (YES or NO) for each single beve-
rage.
1 Preinfusion Ristretto
2 Preinfusion 2 Ristretto
3 Preinfusion Espresso
4 Preinfusion 2 Espresso
5 Preinfusion Coffee
6 Preinfusion 2 Coffee
7 Preinfusion CoffeeCreme
8 Preinfusion Caffelatte
9 Preinfusion Macchiato
10 Preinfusion Cappuccino
11 Preinfusion Big Cappuccino
Press the  keys to confirm / cancel tab pre-
infusion.
Press the RESET key to quit the submenu and return
to the main menu, confirming the setting.
Press the ENTER key to scroll through each single
item in the submenu and confirm the settings.
11. TAMPING
Press the ENTER key to access the submenu.
This allows you to program the coffee tamping
for each drink (YES or NO).
1 Tamping Ristretto
2 Tamping 2 Ristretto
3 Tamping Espresso
4 Tamping 2 Espresso
5 Tamping Coffee
6 Tamping 2 Coffee
7 Tamping CoffeeCreme
8 Tamping caffellatte
9 Tamping Macchiato
10 Tamping Cappuccino
11 Tamping Big Cappuccino
The arrow keys  cconfirm/disconfirm the tam-
ping function for each drink.
Press the RESET key to exit the submenu and go
back to the main menu and to confirm the tamping
programmed.
Press the ENTER key to scroll all the items on the sub-
menu and see confirmation of the tamping programmed.
12. GROUNDS NUMBER
Press the ENTER key to access the submenu.
This allows you to program the GROUNDS
NUMBER. When the number has been rea-
ched, a message will be displayed instructing
you to empty the coffee grounds drawer and
the machine will stop working to allow the
procedure to be done safely.
The arrow keys increase/decrease the grounds
number to proceed to the emptying of the coffee
grounds drawer. Press the RESET key to exit the
submenu and go back to the main menu and to con-
firm the grounds number programmed.
The ENTER key is disabled.
13. MILK CLEAN WARN. H
Press the ENTER key to access the submenu.
This allows you to program after how many
hours, following the last milk delivery, the milk
foamer cleaning warning will be displayed.
The arrow keys increase/decrease the amount
of hours for the display of the milk foamer cleaning
warning message.
Press the RESET key to exit the submenu and go
back to the main menu and to confirm the number
of hours programmed. The ENTER key is disabled.
61