Safety Instructions - Nuova Simonelli Microbar Mode D'emploi

EN
2.

SAFETY INSTRUCTIONS

This book is an integral and essential part

of the product and must be given to the
user. Read this book carefully. It provides
important information concerning safety
of installation, use and maintenance. Save
it carefully for future reference.
After unpacking, make sure the appliance

is complete. In case of doubts, do not
use the appliance, but consult a qualified
technician. Packaging items which are
potentially dangerous (plastic bags, poly-
styrene foam, nails, etc.) must be kept
out of children's reach and must not be
disposed of in the environment.
RISK OF POLLUTION
The machine is can be installed in staff

kitchen areas in shops, offices and other
working environments, farm houses by
clients in hotels, motels and other resi-
dential type environments bed and brea-
kfast type environments.
Before connecting the appliance make sure

the rating plate data correspond with the
mains. The nameplate is located on the
back of the machine, on the left-hand side
at the bottom. The appliance must be instal-
led by qualified technicians in accordance
with current standards and manufacturer's
instructions.
The manufacturer is not liable for any dama-
ge caused due to failure to ground the
system. For the electrical safety of the
appliance, it is necessary to equip the
system with the proper grounding. This
must be carried out by a qualified electrician
who must ensure that the electric power of
the system is sufficient to absorb the maxi-
mum power input stated on the plate.
In particular you must ensure that the size

of the wiring cables is sufficient to absorb
power input.
The use of adapters, multiple sockets or
extensions is strictly forbidden. If they
prove necessary, call a fully qualified
electrician.
When installing the device, it is necessa-

ry to use the parts and materials supplied
with the device itself. Should it be neces-
sary to use other parts, the installation
engineer needs to check their suitability
for use in contact with water for human
consumption.
Fig. 4
This machine must be installed according

to the applicable federal, state, and local
standards (codes) in force with regard
to plumbing systems including backflow
prevention devices.
For this reason, the plumbing connec-
tions must be carried out by a qualified
technician.
The device needs to be supplied with

water that is suitable for human consum-
ption and compliant with the regulations
in force in the place of installation. The
installation engineer needs confirmation
from the owner/manager of the system
that the water complies with the require-
ments and standards stated above.
This appliance must only be used as

described in this handbook. The manu-
facturer shall not be liable for any damage
caused due to improper, incorrect and
unreasonable use.
Fig. 5
43