Nuova Simonelli Microbar Mode D'emploi page 47

EN
For installation, the qualified electrician

must fit an omnipolar switch in accordance
with the safety regulations in force and with
3 (0,12) or more mm (in) between contacts.
To avoid dangerous overheating, make

sure the supply cord is fully uncoiled.
Do not obstruct the extraction and/or dissi-

pator grids, especially of the cup warmer.
The user must not replace the appliance

supply cord. If the cord is damaged,
switch off the appliance and have a quali-
fied technician change the cord.
If no longer using the appliance, we

recommend making it inoperative; after
removing the plug from the mains electri-
city, cut the power supply cable.
CAUTION
RISK OF POLLUTION
Do not dispose of the machine in the

environment: to dispose of the machine,
use an authorised centre, or contact the
manufacturer for relative information.
To ensure that the machine is properly

ventilated, place it with the ventilation
side at a distance of 15 cm (5,9 in) from
walls or other objects.
Once a machine wash cycle has been

started, do not interrupt it, as detergent
residues may then be left inside the deli-
very group.
Use the steam nozzle with care and never

place hands below the jet of steam. Do
not touch the nozzle immediately after
use.
Fig. 9
We remind you that before carrying out

any installation, maintenance, unloading
or adjustment operations, the qualified
operator must put on work gloves and
protective footwear.
When adding coffee beans, the machine

operator must not place his/her hands
inside the container.
Fig. 10
CAUTION
RISK OF INTOXICATION
CAUTION
RISK OF BURNS OR SCALDING
CAUTION
RISK OF CUTTING
Fig. 11
45