Safety Instructions - Nuova Simonelli MICROBAR II Manuel D'instructions

SAFETY INSTRUCTIONS

This book is an integral and essential part
of the product and must be given to the
user. Read this book carefully. It provides
important information concerning safety
of installation, use and maintenance.
Save it carefully for future reference.
After removing the packaging, verify
appliance integrity. In case of doubts,
do not use the appliance, but consult
a qualified technician. Packaging items
which are potentially dangerous (plastic
bags, polystyrene foam, nails, etc..) must
be kept out of children's reach and must
not be disposed of in the environment.
RISK OF POLLUTION
The machine is intended to be installed
in staff kitchen areas in shops, offices
and other working environments, farm
houses by clients in hotels, motels and
other residential type environments bed
and breakfast type environments.
Before connecting the appliance make
sure the rating plate data correspond with
the mains. The nameplate is located on
the back of the machine, on the left-hand
side at the bottom. The appliance must
be installed by qualified technicians in
accordance with current standards and
manufacturer's instructions.
The manufacturer is not liable for any
damage caused due to failure to ground
the system. For the electrical safety of
the appliance, it is necessary to equip
the system with the proper grounding.
This must be carried out by a qualified
electrician who must ensure that the elec-
38
tric power of the system is sufficient to
absorb the maximum power input stated
on the plate.
In particular you must ensure that the
size of the wiring cables is sufficient to
absorb power input. The use of adapters,
multiple sockets or extensions is strictly
forbidden. If they prove necessary, call a
fully qualified electrician.
When installing the device, it is nec-
essary to use the parts and materials
supplied with the device itself. Should
it be necessary to use other parts, the
installation engineer needs to check their
suitability for use in contact with water
for human consumption.
The hydraulic system of this machine
must be installed according to the appli-
cable standards concerning hydraulic
hygiene and safety for environmental
protection. For this reason, the plumb-
ing connections must be carried out by
a qualified technician. The machine with
water main connection must be installed
using a new pipe furnished with the
machine. Never use old pipings to con-
nect the machine.
The device needs to be supplied with
water that is suitable for human con-
sumption and compliant with the regu-
lations in force in the place of instal-
lation. The installation engineer needs
confirmation from the owner/manager of
the system that the water complies with
the requirements and standards stated
above.
This appliance must only be used as
described in this handbook. The manu-
facturer shall not be liable for any dam-
age caused due to improper, incorrect
and unreasonable use.
EN