Machine Installation (Version For Direct Connection); Filling The Coffee Container - Nuova Simonelli MICROBAR II Manuel D'instructions

The water hardness must be below 4° - 6° fr
(French degree).
Otherwise the conditions of guarantee of the
machine will expire.
2.2 MACHINE
INSTALLATION
(VERSION FOR DIRECT
CONNECTION)
Once the machine has been withdrawn from the
packaging, carry out the following instructions:
1 Position the unit on a horizontal surface.
2 Remove the pipe with 3/4" coupling from the
hatch in the top of the machine.
3 Connect a pipe end to the 3/4" coupling placed
on the top of the machine.
4 Connect the other end of the pipe to the hydrau-
lic system.
The water hardness must be below 4° - 6° fr
(French degree).
Otherwise the conditions of guarantee of the
machine will expire.
48
CAUTION
Fig. 7
Fig. 8
CAUTION
The machine must be installed according
to the applicable federal, state and local
standards (codes) in force with regard
to plumbing systems including backflow
prevention devices. For this reason, the
plumbing connections must be carried
out by a qualified technician.
2.3 FILLING THE
COFFEE CONTAINER
1 Remove the cap to access the granulated coffee
bean container.
Pour ONLY toasted coffee beans into the coffee
bean holder. Any other kind of coffee, for example
ground coffee, will damage the coffee grinder.
Don't insert caramelized, sugar coated, instant
coffee or other sugary beverages to prevent the
appliance from being damaged.
2 Don't fill to the brim but pour just enough toasted
coffee beans into the coffee bean holder to
ensure correct closure of the unit.
3 Close the cap.
EN
CAUTION
Fig. 9