Transport And Handling; Machine Identification - Nuova Simonelli MICROBAR II Manuel D'instructions

TRANSPORT AND HANDLING

MACHINE
IDENTIFICATION
Always quote the machine serial number in all com-
munications to the manufacturer, Nuova Simonelli.
Mod. MICROBAR II
S.N. XXXXXX
220 - 240 V
50 / 60 Hz
Operating Pressure 0,165 MPa
TRANSPORT
The machine is transported on pallets which also
contain other machines - all boxed and secured to
the pallet with supports.
Prior to carrying out any transport or handling opera-
tion, the operator must:
put on work gloves and protective footwear, as
well as a set of overalls which must be elasti-
cated at the wrists and ankles.
The pallet must be transported using a suitable
means for lifting (e.g., forklift).
HANDLING
WARNING
RISK OF IMPACT
OR CRASHING
During all handling operations, the operator
must ensure that there are no persons, objects
or property in the handling area.
The pallet must be slowly raised to a height of
30 cm (11.8 in) and moved to the loading area.
After first ensuring that there are no persons,
objects or property, loading operations can be
carried out.
Upon arrival at the destination and after ensuring
that there are no persons, objects or property in
the unloading area, the proper lifting equipment
(e.g. forklift) should be used to lower the pallet to
the ground and then to move it (at approx. 30 cm
(11.8 in) from ground level), to the storage area.
42
Date 09 / 03 /2015
P = 2100 W
MAX Inlet Pressure 0,65 Mpa
WARNING
RISK OF IMPACT
OR CRASHING
Before carrying out the following operation, the
load must be checked to ensure that it is in the
correct position and that, when the supports are
cut, it will not fall.
The operator, who must first put on work gloves
and protective footwear, will proceed to cut the
supports and to storing the product. To carry
out this operation, the technical characteristics
of the product must be consulted in order to
know the weight of the machine and to store it
accordingly.
RISK OF POLLUTION
EN
WARNING