Thermador PROFESSIONAL Serie Guide D'utilisation page 25

To replace the halogen bulb on the oven ceiling:
Turn off power to the oven at the main power supply
1.
(fuse or breaker box).
Remove the oven racks if necessary to provide access
2.
to the bulb housing.
Remove the glass cover by unscrewing it.
3.
The halogen bulb is visible in the light fixture.
4.
Remove the halogen bulb by pulling it out of the 2 pin
5.
socket. Pull straight down and out.
Replace with a new halogen bulb. Grasp the new bulb
6.
with a clean, dry cloth. Press the 2 pins on the bulb
into the socket holes until the bulb is firmly seated.
Screw the glass cover back on.
7.
Turn power back on at the main power supply (fuse or
8.
breaker box).
To replace the halogen bulb on the oven sidewall:
Tools required
è  PP
Turn off power to the oven at the main power supply
1.
(fuse or breaker box).
Remove oven racks if necessary to provide access to
2.
the bulb housing.
Optional: remove oven door to provide easier access
3.
and visibility.
Insert the tip of a narrow flat blade screwdriver
4.
between the metal clips at about a 40° angle. The
screwdriver blade must be able to pass between the
metal clips to reach the inner catch.
(A) Push the screwdriver blade inward to disengage
5.
the catch from the slot in the light housing.
Support the glass lens cover to prevent it from falling.
Narrow flat blade screw-
driver (blade tip width 1/
5" (5 mm) or less to fit in
slot).
Flashlight (to see socket
holes to plug in bulb
prongs).
25