Filter Maintenance - Iberspa SM-USO Manuel D'utilisation Et D'installation

6.3. Filter maintenance

ATTENTION
It is advisable to periodically check the condition of the filter cartridge. If dirt
is observed, it must be clean or replace it. Remember that a clogged filter
produces a drop in the flow of water, can cause a malfunction of the Spa.
The Spa should always operate with the pre filter and filter cartridge placed
correctly. Never place objects that might clog the inlet of the filter.
All spas include a filter. Check the type of your spa filter and follow the instructions.
TELESCOPIC FILTER CLEANING
1. Disconnect the electrical equipment. Differential in OFF position.
2. Unscrew the top of the filter.
3. Remove the cartridge.
4. Clean the cartridge with water at low pressure.
FILTER PRESSURE CLEANING
1. Disconnect the electrical equipment. Differential in OFF position
2. Unscrew the cap on top of the filter.
3. Release lock and unscrew the top of the filter.
4. Remove the cartridge.
5. Clean the cartridge with water at low pressure.
52
TELESCOPIC PRESSURE +
SKIMMER
SKIMMER
036
037
038