Iberspa SM-USO Manuel D'utilisation Et D'installation page 36

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 116
PRE-SET FILTER CYCLES
Main Screen
To next item in
Main Menu
PURGE CYCLES
In order to maintain sanitary conditions, as well as protect against freezing, secondary
water devices will purge water from their respective plumbing by running briefly at
the beginning of each filter cycle. (Some systems will run a certain number of purge
cycles per day, independent of the number of filter cycles per day. In this case, the
purge cycles may not coincide with the start of the filter cycle.)
If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a
purge when Filter Cycle 2 is programmed to begin.
MEANING OF FILTER CYCLES
1. The heating pump always runs during the filter cycle*
2. In Rest Mode, heating only occurs during the filter cycle
3. Purges happen at the start of each filter cycle
* For example, if your spa is set up for 24/hour circulation except for shutting off when
the water temperature is 3˚F/1.3˚C above the set temperature, that shutoff does not
occur during filter cycles.
36
| TP600
While the Temperature is still
flashing, press Light repeatedly
until MODE appears in the LCD.
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
To Set
To Set
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
| TP600
| TP600
Sets start hour
Selects minutes
Sets Filter 1 length in hours
Selects part of an hour
To Set
*****
Waiting several seconds will lose
any new Filter 1
Start Time and Run Hours and revert
to the previous Filter 1 settings.
Main Screen
Waiting
Several Seconds
Reverts to Original Setting
*****
To Set
Selects minutes
Sets start hour
Sets Filter 2 length in hours
Selects part of an hour
To Set
*****
Waiting several seconds will lose any
new Filter 2 On/OFF,
Start Time and Run Hours and revert
to any previous Filter 2 settings.
Sets 15-minute increments
Waiting
Several Seconds
Reverts to Original
Setting
*****
Sets 15-minute increments
Wait to Revert
*****
Waiting
Sets 15-minute increments
Several Seconds
Reverts to Original
Setting
*****
Sets 15-minute increments
*****
Main Sc
r een
Main Screen

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ins-pr

Table des Matières