Iberspa SM-USO Manuel D'utilisation Et D'installation page 38

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 116
will show since the settings lock doesn't do much in that situation. When the panel
is locked, the Settings Screen will only show items not affected by that lock (System
Info and Lock Screens).
8.
= Invert (or flip) Screen.
9.
= Light is turned ON.
10.
= Music is Active.
11. Message Waiting Indicator:
The Message Waiting Indicator will show one of the following icons:
= Fatal error (Spa can't function until it's fixed)
= Normal Error or Warning
= Reminder Message
= Information Message.
Some messages will include the "Call for Service" text as it requires a service
technician to fix the problem. If the panel is locked and a message alert appears, you
will be taken to the UNLOCK screen before you can clear the message. Touching
the Error/Warning/Reminder/Info Icon on the Message Screen will take you to the
System Information Screen to allow for troubleshooting over the phone or for a field
service tech to better understand what is going on. Exiting the System information
Screen will take you back to the Message Screen in that situation.
12. Adjust set temperature higher.
13.
= Spa Equipment Control Icon. Brings up a screen where the spa jets, blower or
other equipment can be controlled.
or not.
14. Indicates if the temperature is in ºF = Fahrenheit or ºC = Celsius.
15. Current water temperature.
16. Setting Icon.
applied). Takes you to Settings Screen.
Where the available specific features that can be adjusted for the control can be
adjusted. The same goes for the Utilities Screen and the Test Screen (used by Spa
Technicians).
17. Indicates when the spa heater is on.
18. Adjust set temperature lower.
Note: After 30 minutes* the display will automatically go into sleep mode, which turns
the display off. This is normal operation. Touch anywhere on the screen to wake the
panel up.
38
= Light is Inactive.
= Music is Inactive.
= Jet is Inactive. Indicates if a pump is running
= Settings is Active.
= Light is Disabled.
= Music is Disabled.
= Settings is Inactive (when a Lock is

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ins-pr

Table des Matières