Iberspa SM-USO Manuel D'utilisation Et D'installation page 51

• SPA-DEGREASER: To remove rings of dirt and grease that form on the walls of the Spa.
To use this product, it is recommended to empty the Spa and apply a degreaser with a
sponge on the parts to be cleaned. Rinse immediately with plenty of water.
OZONE GENERATOR
Ozone, O3, is an oxidising chemical component which is very effective in disinfecting
water. Its main advantage is that it leaves no chemical residue and is odourless.
Its disinfectant properties are based on its oxidising potential, which leads to the
elimination of any organic matter that there may be in the water.
In order to produce ozone, some Spas have an ozonator which, with electricity, can
produce ions of ozone from atmospheric oxygen. This process occurs automatically, and
the product generated is injected via the filtration return nozzles. Thus, it is not necessary
for the user to activate any mechanism for its generation.
The water is collected by the overflow, the drains or the skimmer, due to the suction of
the filter pump.
Then it passes through the heat exchanger and in its outlet it is injected with ozone. The
water is distributed via the filtration return system.
Ozone treatment does not exclude the use of other chemical products such as Bromine
or Chlorine.
The ozone is considered as a complementary process to the ones above, thus reducing
the consumption of Bromine or Chlorine.
QUICK GUIDE TO THE APPLICATION OF CHEMICAL PRODUCTS
Reason for Use
pH Minor Spa Add if the pH level is above
acceptable levels (7.2-7.6 ppm).
pH Major Spa Add if the pH level is below
acceptable levels (7.2-7.6 ppm).
Bromide tablets Add if the Br level is below
acceptable values (2,2-3,3 ppm).
Anticalcareous To prevent precipitation of
calcium salts (scale).
Spa Algaecide Prevents algae from growing in
the water.
Degreaser To eliminate rings of dirt on the
walls of the Spa.
Antifoam Foam in the water.
Amounts per m of water
3
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical product
manufacturer.
Add following recommendations
of the chemical products
manufacturer.
Rub with a sponge and
immediately rinse with abundant
water.
Add following
recommendations of the
chemical product manufacturer.
ENG
Frequency of use
Analyse the pH daily with the
pH Test.
Analyse the pH daily with the
pH Test.
Analyse the Br daily with the
Br Test.
Once a week and whenever the
water is renewed.
Once a week and whenever the
water is renewed.
Whenever dirt is observed on
the walls of the Spa.
Whenever foam appears in
the water.
51