Ingersoll Rand R4-11 kW Mode D'emploi page 30

EN
Bit 0: Host/Local (R/W)
0 = Local
1 = Host
Bit 1: Run/Stop (R/W)
0 = Stop
1 = Run
Bit 2: Load/Unload (R/W)
0 = Unload
1 = Load
Bit 3: Modulating (R) **
0 = Not Modulating
1 = Modulating
Bit 4: Unused
Bit 5: Stopped in Auto Restart (R)
0 = Not Stopped in Auto Restart
1 = Stopped in Auto Restart
Register 100: Starter Type
1 = Star-Delta
2 = Remote Starter
3 = Soft Starter
Registers 132, 135: Day
Code
02** Sensor Failure 3APT
03 Sensor Failure 4APT
08** Sensor Failure 7APT
10 Sensor Failure 2ATT
11** Sensor Failure 7ATT
18 Motor Overload (Main) –due to CTs
19 Overload –due to Thermal OL
22** Check Motor Rotation
25 Remote Stop Failure
26 Remote Start Failure
28** Low Sump Pressure
29 High Air Pressure
31 High Airend Discharge Temperature
Note that (**) Marked bits and codes are not applicable for R4-11 packages
EN-30
RELEASED 16/Dec/2014 10:49:53 GMT
Table 9 : Xe 70M Fixed Speed Controller Register 01-Status/Control
Table 10 : Xe 70M Fixed Speed Controller Register Codes
0 = Sunday
1 = Monday
2 = Tuesday
3 = Wednesday
Table 11 : Xe 70M Fixed Speed Controller Trip & Warning Codes
Description
Bit 6: Alarm (R)
0 = No Alarms
1 = Alarms
Bit 7: Warning (R)
0 = No Warnings
1 = Warnings
Bit 8: on/off Line Mode (R)
0 = Not in on/off Line Mode
1 = on/off Line Mode
Bit 9: Mod/ACS or Mod only (R) **
0 = Not in Mod/ASC Mode
1 = Mod/ASC Mode
Bits 10-12: Unused
Bits 13-15: Unit Type (R): Unused
Register 114: Mode of operation
0 = on/off Line
1 = MoD/ACS **
2 = Modulation only **
4 = Thursday
5 = Friday
6 = Saturday
Code
32 Emergency Stop
34** Change Separator Element
36 Sensor Error (Calibration)
38 100 Hours To Service
39 Service Required
40 Alarm –Service Required
48 Unit Too Cold To Start
49** High Sump Pressure
51** Dryer High Pressure
52 Dryer Temperature Warning
55 Change HE Filter (Dryer)
56 Sensor Failure –Main Motor CT Inputs
7 = Daily
8 = Weekdays
9 = Weekends
Description
80448483 Rev.B