Operating Instructions For Integrated Dryer; Introduction; Symbols And Labels Used In The Manual And On The Dryer - Ingersoll Rand R4-11 kW Mode D'emploi

EN

INTRODUCTION


This manual is an integral part of the dryer you bought, and must remain with
the machine even if this will be resold.
It is highly recommended that the qualified* personnel for installation
maintenance and/or control will fully comply with the contents of this
manual and the prevention and safety rules in force in the country where the
system will be used. In this way, not only the usage of the machine will be
rational, but also the service will result cost effective.

SYMBOLS AND LABELS USED IN THE MANUAL AND ON THE DRYER


Pay particular attention to the indications preceded by
these symbols.
Air inlet / outlet
Air inlet / outlet
Air inlet / outlet
Air inlet / outlet
Air outlet
Air inlet.
Read the Operators manual before attempt to start up
the machine and to perform any service operation on the
dryer.
Installation, maintenance, and/or control operations
preceded by these symbols must be performed exclusively
by qualified personnel*.
EN-38
RELEASED 16/Dec/2014 10:49:53 GMT

oPERATING INSTRUCTIoNS FoR INTEGRATED DRYER

Table 23 : Symbols and Labels
In case your dryer will present any kind of problem, please contact your local
authorized Ingersoll Rand distributor.
Note that, when necessary, the use of original spare parts will ensure
efficiency and long duration to your dryer.
Due to the continuous technological evolution, Ingersoll Rand reserves the
right to modify the specifications contained in this manual without giving
previous notice.
Pay particular attention to the risk of moving parts
Pay particular attention to components or systems under
pressure.
Pay particular attention to hot surfaces.
Condensate drain point.
Condensate drain point.
Pay particular attention to the risk of electric shock.
Rotation direction of the fan.
Attention: Before performing any maintenance operation
on this machine, do not forget to disconnect the electric
supply, to completely discharge air pressure, and to refer
to the Operators manual.
* Qualified personnel must be trained and certified in accordance with local
laws and regulations.
80448483 Rev.B