Fort VISION Manuel D'utilisation Et D'entretien page 62

Use and maintenance ATOMIZER ON VISION MULTIFUNCTION MACHINE
2
E
4
1
WARNING: All other information/instructions must
be taken from the VISION manual supplied with
each individual machine and that the Operator
must have read and stored.
The company «FORT» sends the various groups described,
packaged and already assembled (see Fig. 17):
1) Fan group;
2) Product tank group;
3) Pressure regulator control group.
After unpacking the various groups and having disposed of
the packaging correctly, proceed with the assembly works.
With the machine well locked, with the engine off, on level
ground and inside a suitably equipped workshop, proceed
with the various assembly works.
62
D
C
?
3
Fig. 18 - Mechanical assembly
D
E
?
?
?
5
F
A
B
6
12
7
12
8
10
9
WARNING: During assembly works, the presence
of #2 experienced Operators provided with ap-
propriate accident prevention protective clothing
(Personal Protective Equipment).
Figure 18 shows the complex of the main elements that
make up the self-propelled atomizer.
Description Fig. 18:
1) Coupling sleeve to the power take-off.
2) Latch for locking the PDF sleeve.
3) Plug for connection to the socket (12 Volt) on the tractor.
4) Fan group stabilizer roller.
5) Control group fixing bracket (see Fig. 20).
6) Tank (15 liters), complete with tap, for the water for hand
washing.
B
A
11
14
13