Mounting The Gates Carbon Drive Belt - Rohloff Gates SPEEDHUB 500/14 Manuel D'utilisation

Mounting the Gates Carbon Drive Belt

Mounting the Gates Carbon Drive Belt
The following steps describe how to mount the belt in a bike with already mounted
The following steps describe how to mount the belt in a bike with already mounted
sprockets. If your sprockets have not been mounted yet, please follow the
sprockets. If your sprockets have not been mounted yet, please follow the
instructions for Mounting front and rear sprockets first. If you have any difficulties
instructions for Mounting front and rear sprockets first. If you have any difficulties
with mounting the belt, the video
with mounting the belt, the video at www.gatescarbondrive.com will help you.
16
mounting
mounting
at www.gatescarbondrive.com will help you.
1. Open the frame break or 'gate' on
1. Open the frame break or 'gate' on
the frame's rear triangle. Since
the frame's rear triangle. Since
this break may vary from one
this break may vary from one
manufacturer
manufacturer to another, you'll
need to follow the instructions of
need to follow the instructions of
the manufacturer of your frame.
the manufacturer of your frame.
In the following illustrations the
In the
frame is opened at the dropout.
the frame is opened at the
Insert
dropout. Insert the belt through
the opening
the opening
2. Hang the belt over the bottom
2. Hang the belt over the bottom
bracket and lock the frame gate.
bracket and lock the frame gate.
3. Place the
3. Place the belt on the rear
sprocket
sprocket and mount the rear
wheel into
wheel into the rear dropouts.
www.gatescarbondrive.com
to another,
following illustrations
the belt through
of the frame.
of the frame.
belt on the
and mount the
the rear dropouts.
2
you'll
rear
rear
11