Uncoiling The Belt - Rohloff Gates SPEEDHUB 500/14 Manuel D'utilisation

Mounting the tensioned belt with a lever, and/or by rotating the cranks.
Mounting the tensioned belt with a lever, and/or by rotating the cranks.
Please note:
Please note
Drive belt and sprockets do not need lubrication of any sort. For cleaning,
Drive belt and sprockets do not need lubrication of any sort. For cleaning, use only water
use only water and a soft brush. Please do not use any type of detergent.
and a soft brush. Please do not use any type of detergent.

Uncoiling the belt

Uncoiling the belt
To uncoil the belt, follow the instructions below. Improper uncoiling may cause permanent
To uncoil the belt, follow the instructions below. Improper uncoiling may cause permanent
damage to the belt. It will never be necessary to violently pull the belt. Make sure that the belt
damage to the belt. It will never be necessary to violently pull the belt. Make sure that the belt
is never bent to smaller diameters, as this might damage the carbon fibers inside the belt.
is never bent to smaller diameters, as this might damage the carbon fiber cords inside the belt.
Hold the belt chest high in
Hold the belt chest high in
front of your body. Hold the
front of your body. Hold the
outer coils with both hands.
outer coils with both hands.
Move your hands away from
Move your hands away from
each other slowly, until the
each other slowly, until the
belt uncoils on its own.
belt uncoils on its own.
first steps
first steps
Now the belt is properly
Now the belt
uncoiled.
properly uncoiled.
www.gatescarbondrove.com
www.gatescarbondrive.com
1
1
is
7
7