Rohloff E-14 With Ebike Transmission: General Information; Cycling And Shifting With The Rohloff E-14 - Rohloff SPEEDHUB 500/14 Notice Originale

Masquer les pouces Voir aussi pour SPEEDHUB 500/14:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Rohloff E-14 with eBike Transmission:
-
load-free shifting in connection with eBike transmissions
-
shiftable through all gears, even while stationary
-
Multishift function
-
start gear/Auto-downshift
-
power supply via Bike transmission power source
-
unlimited for S-Pedelec use
-
increased riding comfort
-
increased battery range
A comprehensive guide to the Rohloff E-14 system can be found at:
https://www.rohloff.de/en/service/handbook/e-14

Cycling and shifting with the Rohloff E-14

The Rohloff E-14 combined with the Rohloff SPEEDHUB 500/14 works in unison with a
eBike transmission to provide an optimally coordinated shift between gears. This in turn
increases both the rider comfort, safety and battery range while simultaneously drastically
reducing the wear of all bicycle transmission components.
The direct connection and thus permanent communication between Rohloff E-14 and
eBike transmission via CAN-Bus, ensures the continuous evaluation of:
-
current support level provided by the eBike transmission
-
current crank position
-
current power input level of cyclist
A single push of either the '+' or '˗' button on the Rohloff E-14 Switch Unit will trigger a
chain of commands, calculating the ideal time for the Rohloff E-14 and eBike transmission
to perform the actual gear shift.
-
the support level of the transmission will be reduced
-
the shift command will be sent to the Rohloff E-14 Shifter Unit
-
the selected gear will be quickly and precisely engaged at the exact point where
cranks are vertical (least human input force applied)
-
the support level of the transmission will be re-applied
-
this entire process will be completed in approximately 0.2 seconds
A little rider input is also required to ensure the load-free and comfortable shift is
completed within 0.2 seconds:
-
an optimal cadence of between 50 and 80
-
avoid increased pedal force during the shift process
-
foresightly cycling, e.g. downshifting before a hill rather than once on it
All the above will ensure the battery range is extended and the number of charges is
reduced.
General Information
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E-14

Table des Matières