Disconnection Of Cable Plugs; Connection Of Cable Plugs - Rohloff SPEEDHUB 500/14 Notice Originale

Disconnection of cable plugs

Switch the eBike System "off". Pay attention to manufactures operation manual.
Clean the connection area thoroughly before disconnecting the cable plugs to avoid later
dirt/moisture contamination of the exposed plug ends.
Do not pull on the cables directly.
Hold both cable plugs and gentle pull these apart trying to keep them as straight as
possible (try to avoid bending or twisting the plugs during this process).
Protect the exposed plug ends from dirt and moisture.

Connection of cable plugs

Both cable plugs are embossed with an arrow indicating their correct orientation.
Hold the cable plugs close together to check the arrows are aligned.
Press the cable plugs gently against each other and rotate them lightly until they latch into
place.
Make sure the cable plug orientation arrows are still correctly aligned.
Push the cable plugs fully home, into their end position.
20