Rohloff Gates SPEEDHUB 500/14 Manuel D'utilisation page 72

Illustration 1:
QR Snubber
Depending on OLD of the Rohloff SPEEDHUB 500/14 hub and the design of the derailleur
hanger, a different number of spacers must be placed between the snubber support and
the snubber axle in order to position the snubber coil with the greatest possible overlap
with the belt. An overview of the possible configurations is given in the following table.
Rohloff Model
500/14
500/14
500/14
XL 500/14
XL 500/14
XXL 500/14
XXL 500/14
Illustration 4:
Without spacer
Illustration 2:
RDM Snubber
OLD RDM Shimano
Snubber
135 1x Spacer, M6x30
142 1x Spacer, M6x30
148 2x Spacer, M6x30
170 1x Spacer, M6x30
177 1x Spacer, M6x30
190 2x Spacer, M6x30
197 2x Spacer, M6x30
Illustration 5:
1x Spacer
mounting
Illustration 3:
RDM Shimano
Snubber
RDM + QR
Snubber
without
without
1x Spacer, M6x30
without
without
1x Spacer, M6x30
1x Spacer, M6x30
Illustration 6:
2x Spacer
www.gatescarbondrove.com
2
25