Touche De Couture Automatique «Auto-Lock; Knop Voor Automatisch Afhechten „Auto-Lock - VERITAS Marion Mode D'emploi

Table des Matières

Publicité

Les touches de fonction
Aperçu des fonctions les plus
importantes
Touche de couture automatique « auto-lock »
Vous pouvez régler la couture automatique avec
les points 1–4 en mode direct et les motifs 01–05
sélectionnés par numéro.
Si vous appuyez brièvement sur la touche auto-lock,
la machine coud immédiatement automatiquement
3 points de sécurité (points de finition) puis s'arrête
automatiquement.
Le symbole
s'affiche sur l'écran jusqu'à ce que la
machine s'arrête.
Pour les points 6-7 en mode direct, les motifs 07-16,
33-50 du groupe B et les motifs 01-66 du groupe
C sélectionnés par numéro: Si vous appuyez sur la
touche auto-lock pendant la couture, la machine coud
3 points de sécurité (point de finition) en fin du point
programmé puis s'arrête automatiquement.
Le symbole
s'affiche sur l'écran puis s'efface
lorsque la machine s'arrête.
La fonction est effacée, lorsque vous appuyez à
nouveau sur la touche ou que vous sélectionnez un
autre point.
Operation Buttons
The most important functions
at a glance
Auto-lock button
When Direct Patterns 1-4, and B Group Patterns
01-05 are selected, the machine will immediately
sew 3 locking stitches when the Auto-lock button is
pressed, then automatically stop.
If you press the Auto-lock button shortly, the
machine will sew 3 locking stitches and stop auto-
matically.
The LCD will display the figure
machine is stopped.
When Direct Patterns 6-7, B Group Patterns 07-16
, 33-50, and C Group Patterns 01-66 are selected,
press the Auto-lock button, the machine will sew 3
locking stitches at the end of the current pattern and
automatically stop.
The LCD will display the figure
is stopped.
The function will be cancelled if you press the button
once again or select another pattern.
Functietoetsen
De belangrijkste functies
in één oogopslag
Knop voor automatisch afhechten "Auto-Lock"
Voor de directkeuzesteek 1–4 en de steekpatronen
01– 05 met de nummerkeuze kunt u automatisch
afhechten instellen.
Als u kort op de Auto-Lock-knop drukt, naait de
machine direct automatisch 3 afhechtsteken en stopt
daarna automatisch.
Op het LCD-scherm verschijnt het symbool
until the
machine stopt.
Voor de directkeuzesteken 6-7 en steekpatronen
07-16, 33-50 van groep B en 01-66 van groep C: Als
u de Auto-Lock-knop tijdens het naaien indrukt, naait
de machine 3 afhechtsteken aan het einde van de
ingestelde steek en stopt dan automatisch.
Op het LCD-scherm verschijnt het symbool
until the machine
machine stopt.
De functie wordt gewist als u nogmaals op de knop
drukt of een andere steek kiest.
tot de
tot de
74
74

Publicité

Table des Matières
loading

Table des Matières