Displaying The Minimum/Maximum Measurements; Displaying The Temperature, Humidity And Air Pressure Trends; Measured Values Outside Of The Measurement Range; Phases Of The Moon - Eurochron EFWS2900 Notice D'emploi

i) Displaying the minimum/maximum measurements
The weather station automatically saves the maximum and minimum measurements recorded during a 24-hour
period. The saved values are deleted when the weather station is reset or when the batteries are removed. The
maximum/minimum temperature, humidity, air pressure, light intensity and UV radiation readings for the last 24 hours
can be viewed on the LCD. The maximum and minimum readings for wind and precipitation can be viewed for
different time periods. The saved values are automatically deleted at 0:00 each day when the auto-delete feature
("RST") is enabled. For more information on this feature, refer to "a) Basic settings (time, date and units)" in section 11
("Settings").
• Press the MAX/MIN button (2) once to display the maximum readings. "MAX" will appear on the LCD display.
• Press the TEMP. button (7) to view the maximum dew point and heat index readings.
• Press the MAX/MIN button (2) twice to display the minimum readings. "MIN" will appear on the LCD display.
• Press the TEMP. button (7) to view the minimum dew point and heat index readings.
• Press the MAX/MIN button (2) three times to go back to the home screen. You can go back to the home screen at
any time by pressing the LIGHT/SNOOZE button (1).
• To delete the saved maximum values manually, press and hold the MAX/MIN button for 2 seconds when "MAX" is
displayed. The weather station will beep to indicate that the readings have been deleted.
• To delete the saved minimum values manually, press and hold the MAX/MIN button for 2 seconds when "MIN" is
displayed. The weather station will beep to indicate that the readings have been deleted.
• It may take up to 16 seconds for the weather station to receive new readings from the outdoor sensor.
j) Displaying the temperature, humidity and air pressure trends
• The indoor temperature, indoor humidity and the air pressure readings are updated every 60 seconds.
• The trend indicator (arrow) is refreshed every 30 minutes. The weather station uses readings from the last three
hours to calculate the trend.
k) Measured values outside of the measurement range
• "--.-" is displayed when the measured reading is outside of the measurement range.
l) Phases of the moon
• The phases of the moon are calculated using the calendar. The moon phase display (13) shows the natural phases
of the moon for the northern or southern hemisphere.
• Ensure that you have selected the correct hemisphere for your location. For more information, refer to "a) Basic
settings (time, date and units)" in section 11 ("Configuring the settings").
56