Selecting Outdoor Sensor; Displaying The Maximum/Minimum Values; Deleting The Maximum/Minimum Values - Eurochron EFWS 302 Mode D'emploi

k) Selecting Outdoor Sensor
The weather station can display the data measured by up to 3 outdoor sensors (one
outdoor sensor is included in the delivery; other outdoor sensors are available as
accessories).
Briefly press the "" (6) button in normal display (not in setting mode) to display
the measured data of the respective next outdoor sensor (1 -> 2 -> 3 -> 1 -> .....).
The switch between the outdoor sensors can also be performed
automatically. Hold down the "" (6) button for about 3 seconds until you
hear a sound.
The weather station now automatically switches the outdoor temperature/
humidity display (data for outdoor sensors that are not present are displayed
as dashes ("--").
To cancel automatic switching, briefly press the "" (6) button.
l) Displaying the Maximum/Minimum Values
—
Briefly press the button "MAX/MIN" (8) to display the maximum values for indoor
and outdoor temperatures and indoor and outdoor humidity.
The indication "MAX" appears to the left of the temperature value.
—
Briefly press the button "MAX/MIN" (8) to display the minimum values for indoor
and outdoor temperatures and indoor and outdoor humidity.
The indication "MIN" appears to the left of the temperature value.
—
Press the "MAX/MIN" (8) button again to switch back to the normal values.
m) Deleting the Maximum/Minimum Values
Press and hold the "MAX/MIN" (8) button for about 3 seconds until a brief signal
can be heard.
The values are then reset.
The new maximum and minimum values are the current measured values
until they are changed again.
54