Operation; Setting The Time Manually - Eurochron EFWS 302 Mode D'emploi

11. OPERATION

a) Setting the Time Manually
—
Hold down the "TIME" button (10) in normal time display for about 2 seconds
until the year flashes.
—
Set the year with the "" (6) or "" (7) buttons (for quick adjustment, keep the
button pressed down).
—
Briefly press the "TIME" button (10); the month flashes.
—
Set the month with the "" (6) or "" (7) buttons (for quick adjustment, keep
the button pressed down).
—
Briefly press the "TIME" button (10); the date flashes.
—
Set the date with the "" (6) or "" (7) buttons (for quick adjustment, keep
the button pressed down).
—
Briefly press the "TIME" button (10); the display "DST ON" flashes. Now you can
set if summer/winter time is to be switched automatically or not.
—
Use the "" (6) and "" (7) buttons to switch between "ON" (automatic switch
on) or "OFF" (automatic switch off).
—
Briefly press the "TIME" button (10); the hours flash.
—
Set the hours with the "" (6) or "" (7) buttons (for quick adjustment, keep
the button pressed down).
—
Briefly press the "TIME" button (10); the minutes flash.
—
Set the minutes with the "" (6) or "" (7) buttons (for quick adjustment, keep
the button pressed down).
—
Briefly press the "TIME" button (10); the seconds flash.
—
Use the "" (6) or "" (7) button to reset the seconds to "00".
—
Briefly press the "TIME" button (10); the language of weekday display flashes.
47