Searching For Outdoor Sensor(S) - Eurochron EFTH 902 Mode D'emploi

11. SEARCHING FOR OUTDOOR SENSOR(S)

If the basis station does not find one of the outdoor sensors (e.g. in case of bad
reception conditions or after a battery change), you can start search for the outdoor
sensor or sensors manually.
Keep the "" button (11) pressed until the icon for radio reception flashes at each
outdoor sensor channel at the left of the display.
The sensor search takes several minutes. Do not move the basis station during this
time and do not push any button at the basis station.
If an outdoor sensor is not found, check its batteries; place the outdoor
sensor in another location, lower the distance between the basis station
and the outdoor sensors.
Icon flashes: Sensor search
Proper outdoor sensor signal recognition
No signal received in the last 24 hours
48