Searching For Outdoor Sensor(S) - Eurochron EFWS 91 i Mode D'emploi

11. SEARCHING FOR OUTDOOR SENSOR(S)

If the weather station does not find the outdoor sensor (e.g. in case of bad reception
conditions or after a battery change), you can start search for the outdoor sensor
or sensors manually.
The weather station can receive and display the measured data of up to 3
outdoor sensors. Each outdoor sensor must be registered on a different
transmission channel.
The included outdoor sensor is firmly set to channel 1; this cannot be changed.
The outdoor sensors available as accessories have a channel selection switch;
set it to channel 2 or 3.
Keep the „" button (12) pressed until the icon for radio reception (3) flashes at
the left of the display.
The sensor search can take several minutes. Do not move the weather station during
this time and do not press any button.
If the outdoor sensor is not found, check its batteries; place the outdoor
sensor in another location, lower the distance between the weather station
and the outdoor sensor.
Icon flashes: Sensor search
Proper outdoor sensor signal recognition
No signal received in the last 24 hours
53