Switching 12/24H Mode - Eurochron EFWS 91 i Mode D'emploi

—
Briefly press the „mode" button (13); the hours flash.
Set the hours with the „" (11) or „" (12) buttons (for quick adjustment, keep
the button pressed down).
—
Briefly press the „mode" button (13); the minutes flash.
Set the minutes with the „" (11) or „" (12) buttons (for quick adjustment,
keep the button pressed down).
—
Briefly press the button „mode" (13).
This automatically resets the seconds to „00" and leaves the setting mode.
The previously set time is displayed.
After starting setting mode, the DCF reception is deactivated. If DCF
reception is to be activated again, proceed as described in chapter 10. b).
Important:
The settings for weekday display language and 12h/24h mode remain active.
b) Switching 12/24h Mode
—
Briefly press the „" (11) or „" button (12) repeatedly until the display „
flashes.
—
Keep the „mode" button (13) pressed until the weekday display language flashes
in the lower right of the display.
—
Briefly press the „mode" button (13) several times, until „12 Hr" or „24 Hr" flashes
on the display.
Now use the buttons „" (11) or „" (12) to switch between 12h and 24 h mode.
In 12h mode, „AM" is displayed to the left of the time during the first half of
the day, „PM" during the second half of the day.
—
Briefly press the „mode" button (13) repeatedly until no display flashes anymore.
After completion of the setting mode, the DCF reception is deactivated.
To re-activate DCF reception, proceed as described in chapter 10. b).
"
55