Intended Use - Eurochron EFTH 902 Mode D'emploi

2. INTENDED USE

The product is used to display the indoor/outdoor temperature and indoor/outdoor
humidity. One special feature is that the data of three outdoor sensors are displayed
at once.
The data measured by the 3 outdoor sensors are wirelessly transferred to the basis
station.
The time and date can be automatically set by DCF time signal. It can also be set
manually, however (e.g. in case of reception problems).
The basis station and outdoor sensors are operated with batteries.
For a list of all features and characteristics of the product, see chapter 5.
The manufacturer assumes no responsibility for incorrect displays or measured
values and their consequences.
The product is intended for private use; it is not suitable for medical use or informing
the public.
The parts of this product are no toys. They contain fragile and swallowable glass
and small parts, as well as batteries. Keep the product away from children!
Operate all components so that they cannot be reached by children.
Any other use than described above may damage the product and poses additional
dangers.
Read these operating instructions completely and attentively; they contain a lot of
important information on setup, function and operation. Always observe the safety
information!
35