Setting The Snooze Timer; Activating The Alarm; Turn Off The Alarm Sound; Temperature Alarm - Eurochron EFWS 5500 Notice D'emploi

b) Setting the snooze timer
• In normal display mode, keep the button SNOOZE / LIGHT (8) depressed for approx. 3 seconds. Instead of the
clock time, the display will show the Zz indicator and the snooze time in minutes (default setting: 5 minutes).
• Press the button UP (10) or DOWN (6), to change the value. Keep the button pressed for fast adjustment. Select a
snooze time between 3 and 20 minutes.
• To confirm, press the button MODE (7).
• If you do not press any button within 8 seconds, the system will save the value set last and then returns to normal
display mode.
c) Activating the alarm
When in normal display mode, press the ALARM button (12) to activate one or both alarms. The alarm symbol will
light up next to the clock time.
• Press 1x: only AL1 activated
• Press 2x: only AL2 activated
• Press 3x: AL1 + AL2 activated
• Press 4x: no alarm
d) Turn off the alarm sound
• As soon as the waking signal sounds, push the SNOOZE / LIGHT (8) button to activate the snooze function. The
alarm symbol and the Zz indicator starts flashing. The alarm signal sounds again after the pre-set time has elapsed.
• Press any other button to abort the snooze mode.
• You may also directly turn off the alarm by pressing any button.
• If you do not press any button, the alarm signal will turn off after 2 minutes.

17. Temperature alarm

a) Displaying thresholds
When in normal display mode, press the ALERTS button (11) to display the temperature thresholds.
• Press 1x: upper threshold (HI) of the outdoor temperature
• Press 2x: lower threshold (LO) of the outdoor temperature
• Press 3x: upper threshold (HI) of the indoor temperature
• Press 4x: lower threshold (LO) of the indoor temperature
• Press 5x: normal display mode
38