Setting The Alarm Time; Activating/Deactivating The Alarm Function; Stopping The Alarm Signal, Snooze Function - Eurochron EFWS 301 Mode D'emploi

d) Setting the Alarm Time
—
Hold down the "ALM" button (9) for about 2 seconds until the alarm time hours
flash.
—
Set the alarm time hours with the "" (6) or "" (7) buttons (for quick
adjustment, keep the button pressed down).
—
Briefly press the "ALM" button (9); the alarm time minutes flash.
—
Set the alarm time minutes with the "" (6) or "" (7) buttons (for quick
adjustment, keep the button pressed down).
—
Terminate setting mode by briefly pressing "ALM" (9).
Setting mode is terminated automatically (and all settings are stored) if no button
is pressed for 30 seconds.
e) Activating/Deactivating the Alarm Function
—
Briefly press the "ALM" button (9) to display the alarm time.
—
Then briefly press the button "" (6) to activate or deactivate the alarm function.
When the alarm function is switched on, the icon "
between the hours and minutes of the time display.
f) Stopping the Alarm Signal, Snooze Function
The alarm signal is output at the set alarm time.
Press the "SNOOZE/LIGHT" button to interrupt the alarm signal for 5 minutes and
then start it again (snooze function).
To terminate the alarm signal or snooze function, briefly press the button "ALM"
(9).
" and "zZ" is displayed
45