Displaying The Maximum/Minimum Values; Deleting The Maximum/Minimum Values; Weather Station Reset; Outdoor Sensor Reset - Eurochron EFWS 301 Mode D'emploi

k) Displaying the Maximum/Minimum Values
—
Briefly press the button "MAX/MIN" (8) to display the maximum values for indoor
and outdoor temperatures.
The indication "MAX" appears to the right of the temperature value.
—
Briefly press the button "MAX/MIN" (8) again to display the minimum values
for inside and outdoor temperatures.
The indication "MIN" appears to the right of the temperature value.
—
Press the "MAX/MIN" (8) button again to switch to "MIN".
l) Deleting the Maximum/Minimum Values
Press and hold the "MAX/MIN" (8) button for 3 seconds. The stored maximum and
minimum values are then reset.
The new maximum and minimum values are the current measured values
until they are changed again.
m) Activating Backlighting
The weather station's display backlighting is automatically activated for 5 seconds
if you press any button. Then the backlighting goes out again to save power.
n) Weather Station Reset
If you want to reset the weather station (e.g. to start a new search for the outdoor
sensor and the DCF signal), briefly press the "RESET" button (15) at the rear of the
weather station with a toothpick. Alternatively, you can remove the two batteries
from the weather station for a few seconds.
o) Outdoor Sensor Reset
Briefly press the "RESET" button (19) inside the outdoor sensor's battery
compartment with a toothpick. Alternatively, you can remove the two batteries
from the outdoor sensor for a few seconds.
48