Ardo CARUM Mode D'emploi page 214

Summary of test for Electromagnetic Compatibility
The test of electromagnetic compatibility according to IEC / EN 60601-1-2 for this device has shown that in the intended use
no endangering of the functional safety or a failure of this device due to electromagnetic influences are to be expected.
This device uses HF-energy exclusively for its internal function.
Its HF-transmission is therefore very small, and it is therefore unlikely that adjacent electronic equipment will be affected.
Since the propagation of electromagnetic variables is affected by absorptions and reflections from structures and / or by
objects and people, the following must be observed:
This device should not be operated at a short distance from other devices. Do not place any other devices
on the housieng of this device. If it must operate at a short distance from other devices, the device should
be observed to verify its intended performance. If abnormal performance is observed, additional measures
may be necessary, such as re-orienting or relocating the device.
Mobile radio equipment or mobile phones should not be used at a short distance from this device or its
mains power cable.
Interference may occur in the vicinity of equipment marked with the symbol adjacent.
214