Operation; Switching The Pump On And Off; Stimulation Mode; Orange Background - Ardo CARUM Mode D'emploi

Masquer les pouces Voir aussi pour CARUM:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
en

5.3. Operation

Vacuum and cycles can be adjusted independently of one another. Select
the setting that is most comfortable for you.
a
On / off button (stand-by button)
b
Vacuum button (to change the vacuum)
c
Vacuum indicator
d
Dimmer button
e
Dimmer information
f
Time information
g
Stopwatch information
h
Button for time measurement
i
Cycle indicator
j
Cycle button (to change the cycle)
k
Mode button (to switch between
stimulation / expression / "Sensitive Programme")
l
Expression mode
m

Stimulation mode

n
Information ribbon (n = e + f + g)

5.3.1. Switching the pump on and off

The Carum is switched on by pressing the on / off button once.
The display starts with the Welcome page. To switch the Carum off,
press the on / off button again.
5.3.2. Stimulation mode – Orange background
When it is switched on, the Carum starts automatically in the stimulation
mode (orange background) with a rapid cycle and a slight vacuum. This
mode stimulates the let-down reflex. The automatic setting imitates the
natural behavior of the baby. At the start of breastfeeding, babies suckle
with rapid sucking movements and low suction strength which triggers
the flow of breast milk.
The stimulation mode lasts for two minutes and then switches
automatically to the expression mode.
The vacuum and the cycles can be increased or reduced by pressing the
buttons repeatedly or holding them down. The selected settings are
shown using bars. Adjust the vacuum and / or cycle so that you feel
comfortable.
10
CARUM
e
f
n
00:00
Vacuum
d
m
l
c
b
a
g
Cycles
h
i
j
k
CARUM
00:00
Vacuum
Cycles
CARUM
00:00
Vacuum
Cycles
orange

Publicité

Table des Matières
loading

Table des Matières