Accessories / Replacement Parts; Error Messages / Status Messages; Other Possible Faults During Pumping - Ardo CARUM Mode D'emploi

en

7. Accessories / replacement parts

Item
Euro power cord
UK power cord
US power cord
Mobile stand, optional
Bottle holder
Easy Freeze holder
Various pumpsets and other accessories
as well as replacement parts

8. Error messages / status messages

A fault in the Carum or the Carum Battery is indicated on the display by the adjacent
symbol. Please switch the device off and switch it on again. If the fault persists, please have
Error
the device inspected by a service point or the manufacturer.
A flat battery unit in the Carum Battery is indicated on the screen by the adjacent symbol.
When this symbol appears on the display, the Carum Battery switches off automatically after
about 5 seconds. Insert the power cord into the device and connect it to the mains power
to recharge the battery unit.

8.1. Other possible faults during pumping

No vacuum or vacuum is too weak
Check that
• you are using an original Ardo pumpset. (Always express milk using an Ardo pumpset.)
• the second opening on the tube connector is closed.
• the tube connector is firmly seated in the connection opening of the pump.
• the pumpset is correctly assembled and is not damaged. (See instructions for use for the pumpset)
Carum does not function / display remains dark
Check that
• the power cord and its socket are visually in order and are not faulty. Never use a faulty cord or a cord
with faulty plugs!
• the power cord is correctly plugged into the Carum and into the power socket.
• the Carum works on another power socket.
• another device works on the same power socket.
If you confirm that the Carum is faulty, please have the device inspected by a service point or the
manufacturer.
14
Item number
63.00.130
63.00.131
63.00.132
63.00.129
63.00.127
63.00.128
www.ardomedical.com