Start-Up; Electrical Connection; Connecting The Pumpset (Applied Part); Attaching The Bottle Holder - Ardo CARUM Mode D'emploi

5.2. Start-up

5.2.1. Electrical connection

• Insert the power cord (a) into the Carum power connection (b)
and connect to the power socket.

5.2.2. Connecting the pumpset (applied part)

The use of the pumpset is described in the separate operating
instructions for the "Ardo Pumpset".
• Pumping with single pumpset:
Insert the tube connector (c) into one of the two connection
openings on the pump.
• Pumping with double pumpset:
Insert both tube connectors (d) into the connection openings
of the pump.
• The second opening (e) of the tube connector must always be
closed for both single and double pumping.

5.2.3. Attaching the bottle holder

The bottle holder (f) can be hung onto the back of the Carum or
freely positioned.

5.2.4. Attaching the Easy Freeze holder

The Easy Freeze holder (g) is used to hang a freezer bag or breast milk
bottle on the pumpset. It can be hung onto the back in place
of a bottle holder.
b
d
e
f
f
g
en
a
c
9